カガブログ新館「マカオ」|卡加部落格新館「澳門」|Novo KAGABLOG「Macau」|New KAGABLOG「Macao」

嫁と久しぶりに珠海の美容院にいき、嫁は美容院でいろいろやっていて長くなるから、僕は近くの喫茶店でお茶しながらまっていた。ちょうど無料WIFIついてるなので、よぉく携帯でネットやってた。

もちろん、さっそく、いつものどおりに、ツイッター/mixi/facebook/msnでいろいろつぶやいてた。しかし、ツイッターもFacebookもどうつながってもつながらないんだ。

なぜだろうね、急に気に入っていて、ネットで情報を調べたら、ツイッターにもfacebookにも政治敏感の内容が多いため、中国にブロックされてるらしいなんだ。

ぐわっ、ほんま不自由だな。ちなみに、ツイッター/facebookは完全に入られないでもなくて、なんかプロクシ経由でなんとかなりそうだが、一般なユーザーだとそこまでやるもめったにいないから、つまり、ツイッター/facebookを使ったりする大陸人いないともいえるかもね。

ちなみに、youtubeもブロックされてるらしいが、喫茶店のWIFIで入ってみたら、アクセスできてた。youtubeの場合だと地域次第かな。

それから、自分のブログに入ったら、入られるよぉ、っていうか、うちのブログはチャイナにブロックされてないんだ。なんとなく。照ｗ我和太太好耐都冇去大陸的美容院了,我太太去美容院弄好耐,所以我係附近的一間茶餐廳一路high tea一路等.咁啱線係有免費WIFI的,所以用手機WIFI上網.

當然啦,第一時間,例牌都係開晒啲twitter/mixi/facebook/msn寫野,不過twitter同埋facebook無法連上.

點解會咁架呢,好想知點解,所以上網查一查,原來twitter同facebook內含好多政治敏感內容,所以被大陸封鎖咗架.

嘩,真係好冇自由啊.其實都唔係完全登入唔到twitter/facebook既,用啲代理軟件都總算可以登入,不過一般用戶唔會用到咁勁,咁即係可以話係大陸係冇人現twitter/facebook都唔誇.

另外,好似話youtube都被封架,不過間茶餐廳的WIFI可以登山得到.youtube的情況可能視乎地域而已吧.

另外,我試登入我自己的部落格,登入得到架,咁即係話我個部落格冇被大陸封鎖啦.^^;

例のIpedに気に入っていて、ついっ入手した。ｗ

IpadもApadもIpedも書いてなく、MIDのiRobotと書いてあるね。

いくらでも値切りの振る舞いをしたが、最後には630RMBとなった。

Android 1.5だろうと思い、ファームウェアのを覗いてみたら、なんとAndroid 1.6と書いてるんだ。

ちなみに、デバイスで直接にスクリーンショットできるんだ、あれっ、root済み？superuserアプリは入ってないから、rootってないと思うね。それから、このデバイスのrootなら誰も開発してないはずと思うから、rootなんて無理っぽ；；

アプリの導入だが、確かにAndroid Marketが入ってるけど、いまだにAndroidからAndroid TabletにMarketの対応していないため、そのAndroid Marketは単なる飾りしか見えず、ちょうどうちはX10を持ってるから、X10のMarketで落としてるファイルらをAPKopticでカードにバックアップしてから、このiRobotに転送してAPKを入れたりしてなんとかなった。

RockplayerとかWuzhenhuaPlayerとかを入れて直接にrmvbを再生してみたが、CPUの低スペックわけでうまくいかないんだな。rootのできないので、SetCPUでオーバークロックできなくて、直接にrmvbの再生なんて、やっぱり無理っぽ；；想入手一吓傳聞中的那個Iped,於是入手咗.w

又冇寫住Ipad又冇寫住Apad也沒有寫住Iped,只寫住係MID的iRobot.

好努力咁講價架啦,不過最後都係要630人民幣.

以為係Android 1.5啦,不過描一描個firmware寫住係Android 1.6唻架.

另外,呢部野可以直接作screenshot架,咦?root咗?冇superuser軟件係裏面架,我諗應未root機的.而且,部機應唔會有人開發去root佢架啦,所以可root機機會好微;;

有關軟件之導入,的而且確係附有Android Market,不過,現今Android仍未向Android Tablet作Market的支援,所以那個Android Market有如裝飾而已,咁啱線我有部X10,所以用X10下載了Market啲軟件後,用APKoptic備份到卡中,再放入呢部iRobot安裝啲APK檔,總算安裝得倒.

試過Rockplayer同埋WuzhenhuaPlayer,都試過直接播吓rmvb檔,不過因為CPU太低所以一啲都唔順.又root唔到機,所以無法用SetCPU作超頻,直接播rmvb都係無乜可能架啦;;

人はMJのムーンウォークみたいに後ろ歩いたりするのはよくみてるが、うちの子がハイハイでもそういう傾向があるなんてびっくりした。ベッドの真ん中においたら、ちょっとしたら、もうサイドになった、ハイハイでバックやってる。ｗ啲人好似MJ的Moon Walk咁倒後行的話,好多時都見到,我家兒子連爬行都有咁既傾向真嚇了一跳啦.放到床中一陣過後就到床邊啦,連爬行都識倒後.w

うちの子はますます大きくなり、最近は写真通りにあっちこっち触るようになってる。

ハイハイはまだ頻繁でもないが、ハイハイもよくやったら、ほんま見守りは疲れるね。＾＾；囝囝越來越長大,最近常如圖中所見的,呢喥又搞吓戈喥又掂吓起來啦.

未係好多時爬行,如果爬埋就認真唔得閒啦.^^;

住所：香洲区拱北口岸广场来魅力女人世界F062

オフィシャルサイト：http://www.rbt.com.cn

先日も嫁と久しぶりに珠海にいってきたが、買い物してから即帰りだったので、今度こそ久しぶりに珠海のグルメにせまっていった。

珠海の仙踪林といえば、ずっと前にはもう珠海でも開店するのがわかったが、初めて食べに行った。

広州の旅にはよぉく仙踪林にいっていて、珠海のこの仙踪林と比べたら、確かに、珠海のほうがいい内装だが、値段もそれなりだった。「広州のよりかなり高いなと思ってる」

食べ物の品質は悪くない、しかし煙には本当にどうかにしてもらいたいだな。

ちなみに、無料WIFIついてるから、お茶やりながら暇つぶしにぴったりかもしれないですね。

[mappress]地址:香洲区拱北口岸广场来魅力女人世界F062

官網:http://www.rbt.com.cn

早前,我同太太都有好耐冇去珠海,不過買完野就即回家,今次才久別珠海美食坊.

珠海的仙踪林,好早前就知會係珠海開店,今次係第一次去試.

廣州旅行時,好多時都有去仙踪林食,與珠海呢間仙踪林比較之後,的確,珠海的店裝好好多,不過價錢方面都因而有所提高啦.「我覺得貴過廣州好多」

食物方面唔錯,不過如果無煙就好啦.

另外,有免費WIFI架,最啱一路HIGH TEA一路消磨時間.

[mappress]

X10をrootったら、なんだか、マーケットに元々見つかってたアプリ「mixvTweet」は見つからなくなるような気がしてる。

今朝、xda-developersのrssでこんなスレッドがあった。

Paid Market Fix for x10i R2BA023

Ok.. 1st download the following file and extract to your drive:

x10i-R2B-PaidMarket-Fix
Secondly ensure you have debugging enabled in settings and connect your phone:
Settings -> Applications -> Development
Third run “runme.cmd” and wait for it to finish, approx 10-20secs and it will reboot your phone.
Finally, “force stop” and “clear cache” for the market app in:
Settings -> Applications -> Manage Applications.

Try out Market
Good Luck!

なるほど、マーケットの情報遅れてるなのだ、上記のアパッチ当たったら、マーケットにはmixvTweetが見つかった。「dbの更新済み」っすから。把X10 root咗之後,好似係market裏原先能搵到的軟件「mixvTweet」,變後搵唔到啊.

今朝,係xda-developers的rss發現到呢個帖.

Paid Market Fix for x10i R2BA023

Ok.. 1st download the following file and extract to your drive:

x10i-R2B-PaidMarket-Fix
Secondly ensure you have debugging enabled in settings and connect your phone:
Settings -> Applications -> Development
Third run “runme.cmd” and wait for it to finish, approx 10-20secs and it will reboot your phone.
Finally, “force stop” and “clear cache” for the market app in:
Settings -> Applications -> Manage Applications.

Try out Market
Good Luck!

原來係咁,market啲資料唔夠update啊,依照上面的做法之後,market內又搵得返mixvTweet啦,「因db已更新番」

大人しくrootせずにXperia X10を使ってたら、やっぱり、制限多すぎて、xda-developersを除いてみたら、X10のroot情報とかrootまでの手順も丁寧に書かれてるから、rootっちゃおとしてみた。

Newbies Guide to Rooting X10 and giving you the newest firmware! – xda-developers

NOTE: Before you begin, you should know that this process will wipe everything off your phone. So backup your contacts, and text messages and everything on your phone! Download a free backup program from the market to make backups onto your SD card, and after you’re done everything, download that program again and restore everything from SD card. Your SD card remains fine.

1) Install SEUS (Sony Ericsson Update Service).
You can get it from here: http://www.sonyericsson.com/cws/down…-2.10.6.21.exe

2) Run SEUS, follow the prompts. You don’t need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.

Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it’s attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!

3) To check if #2 was successful, click on Start, click Run, and type: regedit
In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USB\Vid_0fce&Pid_adde\

After it’s finished finding, on the right side you’ll see DeviceInstance, then it says REG_SZ, then it says something like USB\Vid_0fce&Pid_adde\5&270d2a78&0&3
You’ll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you’ll need it soon!)

Note: You may have multiple of these if you plugged the USB cord into many USB ports on your computer. Each USB port will give a different DeviceID, so if you have more than one DeviceID, you’ll have to choose one, and if it doesn’t work (you’ll find out when you reach #5!) you will have to choose another one.

Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID

4) Download this:
http://filevo.com/1nlq8wryo11u.html
or from here: http://rapidshare.com/files/40436308…16_ft.rar.html
Extract it.
In the step1 folder, you’ll see a file called DeviceID.txt
Open it up, delete whatever’s there, and put YOUR DeviceID (that you found from the previous step).
Save the file and close notepad.

Note: Make sure there are no extra spaces or lines after/before the DeviceID. The ONLY thing that should be in the file is your DeviceID, NO SPACES/LINES (for example, only this: 5&270d2a78&0&3 [yours will probably be different])

5) Take out the USB cable from your phone (leave it plugged into your computer)
Turn your phone OFF
Open up step1.cmd (it’s not inside the step1 folder, but outside it), but DON’T PRESS ANYTHING

Now we have to put the phone into flash mode. This is how you do it:
Hold the Back button on your phone, and while holding the back button, insert the USB cable into the phone.
A green light should come on the phone (like when it’s charging or a missed call)
Quickly “Press any key to continue…” in the open step1.cmd window.

Let it finish what it’s doing. It will say “Press any key to continue…” after it’s finished. Until then, DON’T touch anything!

If you get problems in this step, refer to this post:
http://forum.xda-developers.com/show…68&postcount=3
Here’s a helpful video for common java issue: http://forum.xda-developers.com/showthread.php?t=713457

After completion, this will give you a Generic X10i R1FA016 firmware (check it by pressing the left button, go to settings>about phone and at the very bottom under build number)
Keep your phone plugged into the USB.

6) Download this:
http://filevo.com/yzmh8wlyrgtz.html
or from here: http://rapidshare.com/files/40435984…_F2v2.rar.html
Extract it.
DELETE step4 folder, step5 folder, step4.cmd and step5.cmd

Now we’re going to put the phone into Debugging mode:
Turn your phone on if it’s not already on.
Press the left button, go to Settings>Applications>Development and check on USB debugging, press OK in the popup. Plug the USB into the phone (in case you disconnected it). You should see an exclamation mark at the very top left of the screen of the phone.

Note: This next step can take a while!
Open step2.cmd, don’t press anything!
On the phone, a list of buttons will come up eventually. Press the 6th option (something about update from SDcard). ONLY PRESS IT ONCE!
Leave your phone alone. Go to the washroom or eat a snack.
You’ll see the progress on the phone screen, as it installs the package. Leave everything alone.

After completion, this will give you a Generic X10i R2BA023 firmware.

If you get problems, try this post: http://forum.xda-developers.com/show…postcount=1122

7) The phone should be on, USB plugged in, and already in USB debugging mode.
Open step3.cmd, and ‘Press any key to continue’
Let it finish what it’s doing, it will say ‘Press any key to continue’ at the end after it’s finished.

After completion, this will give you ROOT! And it also installs some programs for you.

 これで、無事にrootしました。なにかsuperuserとかのアプリも入るようになった。root終わるまで結構時間がかかったが、やり方は案外と簡単だった。よ～し、まずはandroidscreencastを使っちゃうわ。ｗ諗住乖乖哋唔root機地用Xperia X10的,不過,始終都係太多限制啦,瞄一瞄xda-developers之後,睇到有啲X10的root機資料,仲寫埋root機過程添,於是就諗住root囉.

Newbies Guide to Rooting X10 and giving you the newest firmware! – xda-developers

NOTE: Before you begin, you should know that this process will wipe everything off your phone. So backup your contacts, and text messages and everything on your phone! Download a free backup program from the market to make backups onto your SD card, and after you’re done everything, download that program again and restore everything from SD card. Your SD card remains fine.

1) Install SEUS (Sony Ericsson Update Service).
You can get it from here: http://www.sonyericsson.com/cws/down…-2.10.6.21.exe

2) Run SEUS, follow the prompts. You don’t need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.

Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it’s attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!

3) To check if #2 was successful, click on Start, click Run, and type: regedit
In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USB\Vid_0fce&Pid_adde\

After it’s finished finding, on the right side you’ll see DeviceInstance, then it says REG_SZ, then it says something like USB\Vid_0fce&Pid_adde\5&270d2a78&0&3
You’ll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you’ll need it soon!)

Note: You may have multiple of these if you plugged the USB cord into many USB ports on your computer. Each USB port will give a different DeviceID, so if you have more than one DeviceID, you’ll have to choose one, and if it doesn’t work (you’ll find out when you reach #5!) you will have to choose another one.

Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID

4) Download this:
http://filevo.com/1nlq8wryo11u.html
or from here: http://rapidshare.com/files/40436308…16_ft.rar.html
Extract it.
In the step1 folder, you’ll see a file called DeviceID.txt
Open it up, delete whatever’s there, and put YOUR DeviceID (that you found from the previous step).
Save the file and close notepad.

Note: Make sure there are no extra spaces or lines after/before the DeviceID. The ONLY thing that should be in the file is your DeviceID, NO SPACES/LINES (for example, only this: 5&270d2a78&0&3 [yours will probably be different])

5) Take out the USB cable from your phone (leave it plugged into your computer)
Turn your phone OFF
Open up step1.cmd (it’s not inside the step1 folder, but outside it), but DON’T PRESS ANYTHING

Now we have to put the phone into flash mode. This is how you do it:
Hold the Back button on your phone, and while holding the back button, insert the USB cable into the phone.
A green light should come on the phone (like when it’s charging or a missed call)
Quickly “Press any key to continue…” in the open step1.cmd window.

Let it finish what it’s doing. It will say “Press any key to continue…” after it’s finished. Until then, DON’T touch anything!

If you get problems in this step, refer to this post:
http://forum.xda-developers.com/show…68&postcount=3
Here’s a helpful video for common java issue: http://forum.xda-developers.com/showthread.php?t=713457

After completion, this will give you a Generic X10i R1FA016 firmware (check it by pressing the left button, go to settings>about phone and at the very bottom under build number)
Keep your phone plugged into the USB.

6) Download this:
http://filevo.com/yzmh8wlyrgtz.html
or from here: http://rapidshare.com/files/40435984…_F2v2.rar.html
Extract it.
DELETE step4 folder, step5 folder, step4.cmd and step5.cmd

Now we’re going to put the phone into Debugging mode:
Turn your phone on if it’s not already on.
Press the left button, go to Settings>Applications>Development and check on USB debugging, press OK in the popup. Plug the USB into the phone (in case you disconnected it). You should see an exclamation mark at the very top left of the screen of the phone.

Note: This next step can take a while!
Open step2.cmd, don’t press anything!
On the phone, a list of buttons will come up eventually. Press the 6th option (something about update from SDcard). ONLY PRESS IT ONCE!
Leave your phone alone. Go to the washroom or eat a snack.
You’ll see the progress on the phone screen, as it installs the package. Leave everything alone.

After completion, this will give you a Generic X10i R2BA023 firmware.

If you get problems, try this post: http://forum.xda-developers.com/show…postcount=1122

7) The phone should be on, USB plugged in, and already in USB debugging mode.
Open step3.cmd, and ‘Press any key to continue’
Let it finish what it’s doing, it will say ‘Press any key to continue’ at the end after it’s finished.

After completion, this will give you ROOT! And it also installs some programs for you.

咁樣就,成功哋root咗啦.仲有啲唔知咩superuser軟件係入面.root完的過程幾耐吓,不過出奇地簡單啊.好啦,首先就用吓androidscreencast啦.w

Xperia X1(Windows Mobile)を使っていた時に、メール、カレンダー、連絡先なら、ずっとMicrosoft ActivesyncでGoogleとの同期を使ってるから、今度はXperia X10(Android)を使うになって、単なる自分のGoogleアカウントを登録すると、なにもインポートしなくてもすぐ同期になるだが、SMSのほうは同期にならないから、なんかの方法でインポートしなければならない。

元々、SMSのインポートなんか必要のないから、そういう方法を探してないが、ちょうどX10の入手前にCotaiJetの例のキャンペーンに入り、キャンペーン中のSMSをもらって、そのSMSで安くチケット買えるね。しかし、そのキャンペーンのルールによると、SMSの送信元はCotaijetではないまたは転送されたSMSは認められなくて、それに登録のやり直すことができないから、つまり、安く香港にいけるようにするとX10だけなくX1「キャンペーン中のSMSを見せるためのだけ」も持ち込まなければならない。

ネットでこういう面白いものが見つかった。

Import-Export-Move SMS Messages from Windows Mobile to Android – Android Stuff

Click here to download SMS Exporter. This is an experimental application and since I do not have a Windows Mobile phone I have not been able to test it properly. Any feedback about this app is highly appreciated.

Download the .CAB file from the link above and install it on your phone. Running it will present you with a simple form with an “Export” menu.It will export messages into a SMS.xml file which can be directly imported into any Android phone using the SMS Backup & Restore app.

これで、WMからSMS.xmlのファイルを取得し、AndroidにSMS Bakcup & Restoreをもってインポートするができるようになるんだ。ちなみに、notepadでxmlファイルを編集できるから、なんかわざとWMからのインポートしなくても、xmlのそこでニセSMSも作れそうですね。とりあえず、Cotaijetにそのメッセを見せばいいね、2台端末の持ち込まなくても。ｗ我用Xperia X1(Windows Mobile)的時候,啲E-mail,日程,通訊錄都係用Microsoft Activesync與Google同步的,所以今次轉到用Xperia X10(Android)的時候,純粹只係登入自己的Google帳戶唔洗匯入就已經同晒步,不過SMS方面冇得同步,所以要啲方法作匯入方可.

其實,原先沒有匯入SMS的需要的,所以冇搵有關資料,不過咁啱線係入手X10之前要參加了Cotaijet傳聞中的那個推廣,收到推廣中的SMS便可以買平船票.不過,按那個推廣的規則SMS寄件人一定要係Cotaijet而且唔承認轉發的短信,而且無法作重新登記,即係話,想買平飛去香港つまり唔單只要帶X10,仲要帶埋X1「用作出示推廣中的SMS短信」先至得啦.

係網上我搵到呢個有趣的東東.

Import-Export-Move SMS Messages from Windows Mobile to Android – Android Stuff

Click here to download SMS Exporter. This is an experimental application and since I do not have a Windows Mobile phone I have not been able to test it properly. Any feedback about this app is highly appreciated.

Download the .CAB file from the link above and install it on your phone. Running it will present you with a simple form with an “Export” menu.It will export messages into a SMS.xml file which can be directly imported into any Android phone using the SMS Backup & Restore app.

咁樣的話,從WM取出SMS.xml檔,於Android以SMS Bakcup & Restore匯入就得架啦.另外,notepad可以編輯xml檔的,所以其實唔一定要從WM的匯入過唻,xml檔中放入假的SMS都可能行得通架.總言之,向Cotaijet出示呢個短信就得啦,唔洗帶晒兩部電話去啦.w

よ～し、Androidの入手したら、もちろん、すぐ日本語入力のを探すだね。simejiとかもあるけど、自分はOpenWnn Plusのほうが気になるね。 しかし、X10の自体にはもうPOBOx Touchが入り、それに、個人的にOpenWnn Plusのよりよさそうだから、POBox Touchのにするつもりです。でも、X10以外の端末になったら、必ずまたこれを使っとくね。好啦,Android入手之後,當然就梗係搵日文輸入法啦.simeji的都有,不過我較鍾意OpenWnn Plus.

不過,X10本身就已經有POBOx Touch,而且,個人認為比起OpenWnn Plus好似好啲,所以諗住用返POBox Touch.不過,轉到去X10以外的機種的話,一定會用返佢.

今までずっとXperia X1(Windows Mobile)を使っていて、タッチよりボタンのほうが済ませたりして、それから、タイピングにはよくQWERTYのスライドキーボードをやってきたから、正直って、Xperia X10(Android)にして、完全にタッチ入力のしかなくて、違和感か、なんかよく慣れてないような、それに、タイピングミスが多い。QWERTYの脱出まではちょっと時間がかかりそうね。とりあえず、フリックの入力も慣れてみる。我至前一直都係用Xperia X1(Windows Mobile),少用touch,較多用鍵盤啲制操作的,另外輸入方面一直都係用横滑式的鍵盤的,老實講,轉到Adnroid之後,完全係用touch的,有啲唔習慣,而且好多時打錯字添.脫離QWERTY仲有段時間適應,我會試習慣吓flick的輸入法.