最近はROM焼きについてかなり盛り上がってしまい、そういえば、嫁の携帯はHTC Touch Enhanced (Elfin)を思いつき、その携帯も最新のWM6.5にアップしようかと思い、早速、ネットでググってみた。
もちろん、もともとのオフィシャルロムを落とし、そしてHard-SPLとか手間の必要もあるんだね。
まずはここで、以下のROMの取得:
[REF][POLL]Elf – Elfin Original Rom Updates, Model Id & Cid Id List[ONLINE] – xda-developers
RUU_Elfin_CHT_OPEN_2.20.753.1B_4.1.13.51_03.07.90_ BLUE_Ship_Reduced.exe
Device: ELF0100*0
CID: DOPOD601
Version: 2.20.753.1B
Language: CHT
嫁の持ってるHTC TouchはEnhancedなので、いったいUSPLとIPLの時にelfかelfinかあんまり自身のなくて、なんとこの情報で明らかにした。
ImPoRtAnT!!! Elf Elfin – xda-developers
The difference is basic: memory space.
Elf has a 128M ROM and a 64M RAM.
Elfin has a 256M ROM and 128M RAM.
For my Elfin I noticed a change in model number, it has P3452 visible at bottom of his box.
PD: Maybe this is a wrong forum for that question… but if you wanna help, do it.
USPLとIPLの情報ならこちらのリンクへぇ:
[UPG] New USPLs & IPLs for Elf & Elfin – Latest Version 3.14 [ONLINE] – xda-developers
最初は直接に最新までの更新しようと思ったが、なんどもエラーが出てきて、結局更新にはバージョンによって違うっすから、うちのは2.xなので、2.xから更新しないと最新まで進めないがわかった。
For users that already have IPL 2.2X series
1.First make sure your device is application Unlocked. By installing EnableRapi.Cab & Cert_SPC.Cab on your device, then reboot the phone.
2.Take out MicroSD card from Slot.
3.Connect Device through Active Sync.
4.Run the elf-uspl.exe from the Extracted Download (ELF_USPL_2.26.0000.zip)
5.Watch Screen and Press Enter When Asked.
6.Screen should Jump to White on Phone and on PC Flashing Loading Bar will Show.
Stuck in Black Ducky Loading Screen?, check Active Sync Connection or Do a hard reset on Phone first. But be sure to do the last Actual Flashing in White Screen. Sometimes this needs a few tries to go through white screen.
7.Done.
最新のは3.14だが、ROM焼き先のWM6.5には3.14のほうがバッテリ落ちるから、3.10のお勧めと書いてあるから、3.10のにした。
[ROM][WWE][APRIL 10 ’10] Onyx WM 6.5.x (23557) + WM 6.5 (21889) + WM 6.1 (21056) – xda-developers
Follow these steps:
1.Optional: Find your device’s CID and Device ID
2.Optional: Make a backup of the stock ROM currently on your phone. If you have saved a shipped ROM that matches your CID and Device ID, then you can skip this.
3.Install an IPL/USPL or HardSPL which removes the CID lock on your phone. HardSPL 3.10 and IPL 3.10 are recommended. (NOTE: HardSPL 3.14 causes increased battery drain!)
4.Flash Onyx when the above steps have been completed
これで見事にWM6.5のに更新した。ちなみに、スレッドのタイトル通りにファイナルバージョンと書いてあるから、これでもう新しいまで更新しなくてよいかもね。
最後に、ものすごく参考させていただいた中国語の説明このブログに感謝しています、本当にすっごく細かくて丁寧に書いてあるから、改めて誠にありがとうございます。
Markの巢穴 『Elfin/進階文章』HTC TOUCH Elfin如何刷機?(2009.09.12更新載點) – yam天空部落
最近我對刷ROM真好感興趣,話時話,想起我太太部手機係HTC Touch Enhanced (Elfin),可以把佢部手機升到去WM6.5都好哦,即時上網搵資.
當然啦,下載原先的官方ROM,同埋做吓Hard-SPL呢啲功序就必要架啦.
首先到呢到,取得以下的ROM:
[REF][POLL]Elf – Elfin Original Rom Updates, Model Id & Cid Id List[ONLINE] – xda-developers
RUU_Elfin_CHT_OPEN_2.20.753.1B_4.1.13.51_03.07.90_ BLUE_Ship_Reduced.exe
Device: ELF0100*0
CID: DOPOD601
Version: 2.20.753.1B
Language: CHT
我太太用緊的HTC Touch的Enhanced版本,所以究竟USPL及IPL的時候應該係用elf的還是elfin,我唔太肯定,總算俾我係呢度得以明確.
ImPoRtAnT!!! Elf Elfin – xda-developers
The difference is basic: memory space.
Elf has a 128M ROM and a 64M RAM.
Elfin has a 256M ROM and 128M RAM.
For my Elfin I noticed a change in model number, it has P3452 visible at bottom of his box.
PD: Maybe this is a wrong forum for that question… but if you wanna help, do it.
USPL同埋IPL啲資料可以到呢度:
[UPG] New USPLs & IPLs for Elf & Elfin – Latest Version 3.14 [ONLINE] – xda-developers
起初我直接刷最新的,不過好幾次都試咗都係error,結果原來刷的時候按照版本不同而有所不同的,我的係2.x,不從2.x更新的話就不能刷最新的了.
For users that already have IPL 2.2X series
1.First make sure your device is application Unlocked. By installing EnableRapi.Cab & Cert_SPC.Cab on your device, then reboot the phone.
2.Take out MicroSD card from Slot.
3.Connect Device through Active Sync.
4.Run the elf-uspl.exe from the Extracted Download (ELF_USPL_2.26.0000.zip)
5.Watch Screen and Press Enter When Asked.
6.Screen should Jump to White on Phone and on PC Flashing Loading Bar will Show.
Stuck in Black Ducky Loading Screen?, check Active Sync Connection or Do a hard reset on Phone first. But be sure to do the last Actual Flashing in White Screen. Sometimes this needs a few tries to go through white screen.
7.Done.
最新的係3.14,不過我所刷的ROM WM6.5內說明3.14會灑電啲故建議用3.10,所以我用咗3.10.
[ROM][WWE][APRIL 10 ’10] Onyx WM 6.5.x (23557) + WM 6.5 (21889) + WM 6.1 (21056) – xda-developers
Follow these steps:
1.Optional: Find your device’s CID and Device ID
2.Optional: Make a backup of the stock ROM currently on your phone. If you have saved a shipped ROM that matches your CID and Device ID, then you can skip this.
3.Install an IPL/USPL or HardSPL which removes the CID lock on your phone. HardSPL 3.10 and IPL 3.10 are recommended. (NOTE: HardSPL 3.14 causes increased battery drain!)
4.Flash Onyx when the above steps have been completed
咁樣就成功地升到WM6.5了,另外如討論區題目所寫的係最後版本,所以係未有再新版的都唔洗再刷都唔定啦.
最後,真係好鳴謝一個令非常好好參考的中文說明的呢個部落格,真係寫得好詳細啊,再一次真係好多謝佢啊.
Markの巢穴 『Elfin/進階文章』HTC TOUCH Elfin如何刷機?(2009.09.12更新載點) – yam天空部落