wtf coffee?
今の記事のタイトルを見ると、最近、わしの発言は暴れすぎてないと思ってる読者がいる？ｗ
まぁまぁ、そうと思わずに最後まで読んでほしい。ｗ
カジノのマクドナルドは普通のマクドナルドより高いのを知ってるが、まさかこういう高さもあるなんて知らなかった。
普通のマクドナルドで、朝食セットの飲み物を焼きたてコーヒーにお願いするとエキストラ料金1MOPになるだが、カジノ「ギャラクシー」のマクドナルドはエキストラ料金4MOPになるんだ。さすがに、what the fourなんだｗ
wtf coffee?
各位讀者睇見我呢個記事的主題,會否認為我最近的發言上有啲失言咁呢!w
希望大家先唔好咁快咁諗,讀到最後才下結論吧.w
賭場的M記比起普通M記貴我早就知,不過就唔知就連呢方面都要咁樣貴法.
普通M記,早餐轉即磨咖啡只需加1蚊,而賭場「銀河」的M記要加收4蚊咁多.真係what the four囉w
androidscreencast in Jelly Bean
androidscreencastを愛用してた。ただし、Jelly Bean以降だとマウスとキーボードの操作は効かなくなるとVNCサーバーとして代用することになって済んだ。
久々にandroidscreencastの情報を調べてたら、ついにJelly Beanにも使えるバージョンが出た。「本家からのではなく、ユーザーの改造版なんだけど」
そういえば、本家のならば、ICS以降すでに同じバグがあるんで、同じく、ほかのユーザーの改造版でなんとなく済ませてきた。オープンソースは本当にいいことだね。それから、改造に勤めてたユーザーたちも偉いんだ。
Does Anyone succed to control a device with jelly bean withs 4.1 screencast ? – Google グループ
提供者のRobin Chiu様に感謝しております。
というわけで、たぶん、またVNCサーバーからandroidscreencastにうつるかも。完全にVNCサーバーを捨てるでもないね、タブレットからスマホの操作だと、やっぱりVNCサーバーが必要だからね。
ちなみに、androidscreencastだと、VNCサーバーみたいに、any keyでデバイスをスリープから起こせるんじゃないので、下記のbatファイルを用意すればいいね。
「adb shell input keyevent 26」
androidscreencast in Jelly Bean
我之前一直都有用開androidscreencast的.不過自從Jelly Bean之後無法使用mouse同keyboard之後,就用了VNC伺服器而代之.
試再搵androidscreencast資料後發現,終於有對應支援Jelly Bean的版本了.「非官方所出的,而係用家們的改造版.」
話時話,講開官方版的,自從ICS打後也出現同樣問題時,同樣地有某用家弄了改造版因而仍可使用.程式之開放真係好.另外,當然努力弄出改造版的用家們也好偉大.
Does Anyone succed to control a device with jelly bean withs 4.1 screencast ? – Google グループ
謝謝提供者的Robin Chiu先生.
正因為咁樣,我可能又會從VNC伺服器過檔到androidscreencast了.當然唔會完全唔用VNC伺服器啦,因為從平板控制手機時仍要用VNC伺服器的.
另外,androidscreencast唔似得VNC伺服器咁樣,唔可以用任意key弄番醒部機的,所以要弄定以下的bat檔了.
「adb shell input keyevent 26」
詳しくはこちらへ。／詳請見此。
http://www.vishengsu.com/line-rilakkuma/
我が子よりの特別な誕生日プレゼント
息子から誰よりも先に誕生日プレゼントをもらいました。
今朝、LINEで嫁からこういうメッセがキター。
「保育園を休むと保育園に電話しろ。熱だって。」
汗
ちなみに、受診料金は300MOPぐらいだった。さすがにいいプレゼントだった。苦笑
さってと、余話なんだけど。
昨日、息子が嫁にこうと教われた。
明日はパパの誕生日だから、おんちゃんは自分がいい子にしてパパにプレゼントしましょう。
そして、僕、嫁、息子、こういう会話の展開が。。。。
嫁：ほら、パパの誕生日よ、プレゼント、なにを送るでしょう。
息：人形を贈るわ。
カガ：なんで？
息：人形はいい子にしてるから。
カガ：じゃ、お前は？
息：僕はいい子にしないから。
カガ：汗
上記の会話は単なる3才ぐらい子供だったが、ある意味で意味深いだった。＾＾；
囝囝俾我的特別生日禮物
囝囝真係比起誰也最早俾生日禮物俾我了.
今早,太太用LINE寄了以下短信內容給我.
「打電話比托兒所請假吧.發燒啊.」
汗
另外,診金差唔多三百大元.果然係一份唔錯的生日禮物哦.苦笑
好啦,以下是題外話.
琴日,囝囝被太太咁樣教道.
聽日係爸爸生日喔,恩諾要做個好孩子把自己當作禮物送給爸爸喔.
然後,以下就係,我同太太同囝囝的對話內容…….
太：好啦,爸爸生日囉,送咩禮物好呢.
囝：送寶寶公仔比爸爸.
我：點解?
囝：因為寶寶公仔唔會曳,會乖.
我：咁你呢?
囝：我唔會乖囉.
我：汗
以上的對話只是一個3歲半的小朋友而已,不過喺某程度上,對話內容好意思.^^;
WIN7とWIN8のRDPセキュリティ「メモ帳」
この間、香港に新しいノートブックもデスクトップを買ってきた。
ノートブックにはWIN8がはいっていて、デスクトップにはOSついてないが、ネットのどっかでGHOSTでリストアするとすぐにも使えそうWIN8をいれた。
とりあえず、急にWIN8の環境に巻き込まれたって感じ。ｗ
デスクトップのを主にRDPにするから、RDPの設定をいじってみたが、なんだか、どうしてもうまくいけなさそうで、ネットで丁寧によくできてる説明サイトが見つかったんで、メモとして自分のブログにも載せた。ちなみに、説明サイトを見たら、RDPのポートを変更するのには、レジストリだけなく、ファイアウォールで開放するポートを追加することも必要だ。そういえば、XPの頃もそうだったが、WIN7/WIN8とXPの設定はかなり違ってるので、見つけるまで結構苦労した。
Securing remote desktop on Windows 8 and Windows 7 – JKB: Tech & Security
Securing remote desktop on Windows 8 and Windows 7
By Jack On · 27 Comments
This tutorial will outline a few simple steps to secure the Windows Remote Desktop Protocol on Windows 7 and Windows 8. The tutorial is divided up into 5 parts which are independent, so if you only require help with one of these parts you may freely skip to that part that takes your interest.
Part 1
Enable remote desktop and give remote access to specific user(s).
1. Open advanced system properties
Windows 8
- Windows button + X
- Choose “System”
- Then choose “Advanced system properties”
Windows 7
- Click start
- Right click “Computer”
- Choose “Advanced System Properties”
2. Choose the “Remote” tab
3. Under “remote Assistance” deselect “Allow remote assistance connection to this computer” unless you would like to have the
option to invite other people to access your PC.4. Under “Remote Desktop” select:
- Windows 8: “Allow remote connections to this computer” and also tick the box “Allow connections only from computers running Remote Desktop with Network Level Authentication”
- Windows 7: “Allow connections only from computers running Remote Desktop with Network Level Authentication” Notice: The above settings may prevent older Windows systems from connecting (Windows 2000, Windows XP and Windows server 2003)
5. Under “Remote Desktop” click “Select Users…” and click on the “Add” button. Type in your username and click “Check”. Then confirm with Ok. This will give your user the right to connect using remote desktop.
6. Close System properties and return to the desktop.
Part 2
Configuring the local security policy for remote desktop
1. Press Windows button + R to bring up the run command window
2. Type in secpol.msc and press enter
3. Under Security settings expand “Local Policies”
4. Click on “User Rights Assignment”
5. Double click “Allow log on through “Remote Desktop Services”
6. Remove “Administrators” from this window and click ok. This way only users added to the Remote Desktop users group will be able to access this PC remotely. We have added our user to this group in Part 1 step 5.
7. Under local policies (In the folder tree to the left) click on “Audit Policy”, then open “Audit logon events”. Check both Success and Failure and click ok. Our machine will now log any attempts to log in; either via a terminal, remote desktop or the actual machine itself. The logs can be check in the Windows event viewer (Right click computer and click manage, expand “Event viewer”, “Windows Logs” and choose “Security”).
8. You can now close the Local Security Policy window.
Part 3
Configuring advanced remote desktop settings
1. Open the run command dialog (Windows button + R)
2. Type gpedit.msc and click enter
3. Go down the following path in the tree hierarchy: Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host
4. Choose “Security”
5. Open “Set client connection encryption level” and choose “High Level”, click ok
6. Open “Always prompt for password upon connection”, set to enabled and click ok
7. Open “Require secure RPC communication”, set to enabled and click ok
8. Open “Require use of specific security layer for remote (RDP) connections”, set to enabled and select “SSL (TLS 1.0)” in the drop down menu. Click ok
9. Open “Require User Authentication for remote connections by using Network Level Authentication”, set to enabled, and click ok.
Part 4
How to change the remote desktop port number.
The reason for this change is that most would be attackers will most often port scan a range of IP-addresses looking for port 3389. For a normal consumer we would evaluate our threat base as kids who are just having a play or maybe someone who will do damage if they gain access. A pinpointed attack on our home is unlikely, for most normal citizens.
To change the standard port number of 3389 to one of our choosing we need to open the registry editor.
Choosing a port number: Choosing any number from 8000 to 65535 would be optimal however you can choose almost any number up to 65535 if you wish.
1. Windows + R
2. Type regedit.msc
3. Drill down the registry to the following to RDP-TCP:
- HKEY_LOCAL_MACHINE>
- SYSTEM>
- CurrentControlSet>
- Control>
- Terminal Server>
- WinStations>
- RDP-Tcp
4. In the window to the right hand side you will see a entry called “PortNumber”
Tip: Click in the window on the tight and press “PO” on the keyboard.
5. Double click this entry and choose “Decimal” as the Base and type in your desired port number, click ok
PICTURE OFFLINE – Will be reposted ASAP: 17.12.2012
Part 5
Allowing the new port number through the windows firewall.
Open up the Windows firewall either from the control panel or via a search command box
Windows 8: Windows button + W and search after “Settings”
Windows 7: Press start and type in the search box
1. Click “advanced settings” in the windows firewall dialog window
2. Select “Inbound rules” in the pane to the left
3. Select “New rule” in the pane to the right
4. Select “Port”
5. Select “TCP” and “Specific local ports” and type in your port number you choose in part 4
6. Click Next
7. Make sure “Allow this connection” is selected, click next
8. In “When does this rule apply”, tick all the boxes if you are unsure and click next.
9. Give the rule a name. I choose “RDP Custom port number”. I also gave it a short description so I know what I have done.
10. Click finish
11. Restart your computer to complete the port change
IMPORTANT: You must forward your chosen port number through your router to your desired PC. It would therefore be useful to give your desktop a static internal IP address.
Part 6
Connecting to your PC via remote desktop
1. Open the Remote Desktop Connection utility. In the “Computer” field type in your IP and your port number, like this:
- IP:PORT – 192.168.1.2:1111
- If you are outside your internal LAN you will need to use your external IP address instead of your internal IP address
That’s it. I hope your feel more secure now when connecting using Microsoft remote desktop protocol
Jack.
WIN7與WIN8的RDP安全「備忘」
早前,去了香港買手提電腦同埋桌上電腦.
手提電腦的跟有WIN8,而桌上電腦的是沒跟OS的,於是我在網上某處搵到以GHOST回復便可用的WIN8.
總而言之,身邊突然被WIN8環境所包範住.w
那桌上電腦主要用來RDP的,故作了RDP的設定,不過唔知點解好似唔弄都係唔得,喺網上搵到一個寫得幾全面的說明網站,於是攞唻貼埋在我的部格上.而且,睇完個網站說明之後明白,我之前唔得的原因係因為,要改RDP的PORT唔單只要改註冊表,還要到FireWall上加開埋個Port的.話時話,XP果陣時都係咁樣的,不過,WIN7/WIN8與XP的設定唔同咗好多,所以好難先至搵得到.
Securing remote desktop on Windows 8 and Windows 7 – JKB: Tech & Security
Securing remote desktop on Windows 8 and Windows 7
By Jack On · 27 Comments
Part 1
Enable remote desktop and give remote access to specific user(s).
1. Open advanced system properties
Windows 8
- Windows button + X
- Choose “System”
- Then choose “Advanced system properties”
Windows 7
- Click start
- Right click “Computer”
- Choose “Advanced System Properties”
2. Choose the “Remote” tab
3. Under “remote Assistance” deselect “Allow remote assistance connection to this computer” unless you would like to have the
option to invite other people to access your PC.4. Under “Remote Desktop” select:
- Windows 8: “Allow remote connections to this computer” and also tick the box “Allow connections only from computers running Remote Desktop with Network Level Authentication”
- Windows 7: “Allow connections only from computers running Remote Desktop with Network Level Authentication” Notice: The above settings may prevent older Windows systems from connecting (Windows 2000, Windows XP and Windows server 2003)
5. Under “Remote Desktop” click “Select Users…” and click on the “Add” button. Type in your username and click “Check”. Then confirm with Ok. This will give your user the right to connect using remote desktop.
6. Close System properties and return to the desktop.
Part 2
Configuring the local security policy for remote desktop
1. Press Windows button + R to bring up the run command window
2. Type in secpol.msc and press enter
3. Under Security settings expand “Local Policies”
4. Click on “User Rights Assignment”
5. Double click “Allow log on through “Remote Desktop Services”
6. Remove “Administrators” from this window and click ok. This way only users added to the Remote Desktop users group will be able to access this PC remotely. We have added our user to this group in Part 1 step 5.
7. Under local policies (In the folder tree to the left) click on “Audit Policy”, then open “Audit logon events”. Check both Success and Failure and click ok. Our machine will now log any attempts to log in; either via a terminal, remote desktop or the actual machine itself. The logs can be check in the Windows event viewer (Right click computer and click manage, expand “Event viewer”, “Windows Logs” and choose “Security”).
8. You can now close the Local Security Policy window.
Part 3
Configuring advanced remote desktop settings
1. Open the run command dialog (Windows button + R)
2. Type gpedit.msc and click enter
3. Go down the following path in the tree hierarchy: Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host
4. Choose “Security”
5. Open “Set client connection encryption level” and choose “High Level”, click ok
6. Open “Always prompt for password upon connection”, set to enabled and click ok
7. Open “Require secure RPC communication”, set to enabled and click ok
8. Open “Require use of specific security layer for remote (RDP) connections”, set to enabled and select “SSL (TLS 1.0)” in the drop down menu. Click ok
9. Open “Require User Authentication for remote connections by using Network Level Authentication”, set to enabled, and click ok.
Part 4
How to change the remote desktop port number.
The reason for this change is that most would be attackers will most often port scan a range of IP-addresses looking for port 3389. For a normal consumer we would evaluate our threat base as kids who are just having a play or maybe someone who will do damage if they gain access. A pinpointed attack on our home is unlikely, for most normal citizens.
To change the standard port number of 3389 to one of our choosing we need to open the registry editor.
Choosing a port number: Choosing any number from 8000 to 65535 would be optimal however you can choose almost any number up to 65535 if you wish.
1. Windows + R
2. Type regedit.msc
3. Drill down the registry to the following to RDP-TCP:
- HKEY_LOCAL_MACHINE>
- SYSTEM>
- CurrentControlSet>
- Control>
- Terminal Server>
- WinStations>
- RDP-Tcp
4. In the window to the right hand side you will see a entry called “PortNumber”
Tip: Click in the window on the tight and press “PO” on the keyboard.
5. Double click this entry and choose “Decimal” as the Base and type in your desired port number, click ok
PICTURE OFFLINE – Will be reposted ASAP: 17.12.2012
Part 5
Allowing the new port number through the windows firewall.
Open up the Windows firewall either from the control panel or via a search command box
Windows 8: Windows button + W and search after “Settings”
Windows 7: Press start and type in the search box
1. Click “advanced settings” in the windows firewall dialog window
2. Select “Inbound rules” in the pane to the left
3. Select “New rule” in the pane to the right
4. Select “Port”
5. Select “TCP” and “Specific local ports” and type in your port number you choose in part 4
6. Click Next
7. Make sure “Allow this connection” is selected, click next
8. In “When does this rule apply”, tick all the boxes if you are unsure and click next.
9. Give the rule a name. I choose “RDP Custom port number”. I also gave it a short description so I know what I have done.
10. Click finish
11. Restart your computer to complete the port change
IMPORTANT: You must forward your chosen port number through your router to your desired PC. It would therefore be useful to give your desktop a static internal IP address.
Part 6
Connecting to your PC via remote desktop
1. Open the Remote Desktop Connection utility. In the “Computer” field type in your IP and your port number, like this:
- IP:PORT – 192.168.1.2:1111
- If you are outside your internal LAN you will need to use your external IP address instead of your internal IP address
That’s it. I hope your feel more secure now when connecting using Microsoft remote desktop protocol
Jack.
真係好耐冇去香港啦，今次才是真係要把成個香港買返般豁出去，希望那份衝動購物欲也能跟得上吧。w／
本当に久しぶりなんだから、今度こそHKをまるごとに買ってくる覚悟するが、どうか、その衝動買いの気持ちもついてくれますようにw
船內某員工識日文架。咁啱線比我聽到。行李放在前哦。/
船内のある社員が日本語できるんだ。
たまたま聞いちゃった。
荷物はその前にって。
大人のショー「TABOO」
マカオナビのHiroさんからのお誘いで、一緒にCODにあるTABOOという大人のショーを見に行ってきました。
っで、ショーの話に戻るけど、youtubeで紹介映像とかを見たんで、座席のセッティングは映画館のようだと勝手に自分が思い込んでたが、実際はそうではなく、舞台の前にはいくつの半円の形の4人ぐらいしか乗れそうな席「定員は6人でもされてるけど汗」がバラバラに置かれて、ショーは主に舞台で行われてるけど、役者たちは時々客の席の間にグルグル回ったり、客らを親密的に触れたり、盛り上がって、かなりインパクトなショーだった。
僕らはAタイプの席で、VIPまででもないが、VIPの隣にあるので、悪くない席だった。ちなみに、チケットの値段を覗いてみたら、なんと980MOPぐらいんだ。＠＠；
ごらん写真通りに、入場券はおまけでシャンパンがついてます。別払いでほかのドリンクもできるが、メニューを見たら、さすがに、大人向けなんで、アルコールのしかないんだ。Hir@さんはさすがに立派な日本人の顔をしてるかもしれなくて、ある店員に日本語で「お客さん、なにを飲みたいですか」と突っ込まれたｗ。ドリンクはメニュー以外の注文もできる「シンプルミックス」、値段は85MOPぐらい。
youtubeで香港の芸能人たちがこのショーを紹介するのを見たら、みんなも一言でいうと「naughty」だった。自分が実際にこのショーを見たら、同感した。
自分がこのショーを一言で述べれば、「エロいはエロいけど、そこまでエロいでもない」なんか、なにもいってなかったようでわりぃｗ
成人節目「TABOO/色惑」
得到Macau-Navi的Hiro先生之邀請,一齊去了COD睇了一個成人節目TABOO/色惑.
好啦,講返個show,喺youtube睇過個介紹片,我起初還以為座位設定好似戲院咁,實際原來唔係,舞台前面有分佈了好幾個半圓形的大概看似只可座到4個人左右的座席(實際按排會座成6人左右),個show主要於舞台進行,但係演員常會到座客週邊行唻行去,仲會摸啲客人添,弄得氣氛高漲,好互動.
我哋座A席,雖唔係VIP級別,不過喺VIP隔離而已,算唔錯,再瞄吓張入場券金額,原來要成980MOP架.＠＠；
如圖中所見的,入場券跟送一杯香檳.另叫飲品都可以,睇過個餐牌,果然係只有成人的飲品,全都是酒精飲品.Hir@先生外表太有日本人氣質了,被一店員用日文問道「客人,想飲什甚」ｗ.餐牌以外的飲品都可以叫的,「simple mix」、價錢大概85MOP左右.
喺youtube睇過啲香港藝人介紹呢個show,個個都用一個字,「好naughty」.自己實際去一看之後,也有同感.
而自己評價的話會係咁:「話佢係色情又算係色情,不過又未至於咁色情」,講咗好似冇講一樣,抱歉w.
