なんとX10iのR2BA024をroot化した總算把X10i的R2BA024 root咗
XDAの掲示板を覗いてみたら、X10iにはまたまたroot済みの新しいビルドのスレッドが見つかり、さっそく、それをｄｌして自分のX10にいれてみた。
この間のR2BA023をうまくrootして、今度はまったく同じようなの手順で本当は問題ないはずだったが、なんだかんやで間違えてたので、結局やり直すことになった。
問題点はMarket Fixについて、R2BA023向けのをR2BA024のにアパッチ当たってしまったなのだ。そうしたら、エラーだけなく、ブートすらできなくなっちまって、最初はめちゃ焦ってた。やり直すことになる陰でで、もうちょっとroot化の手順とその内容がはっきりにわかってきた。
今までのrootの手順といえば、とにかく、最初はフラッシュ・モードでR2BA016のに戻し、それから最新のファームウェアのビルドのにフラッシュし、最後にはrootに必要があるアプリの転送して完了。
そのわけで、root途中にイザっとなっても、とにかく、最初からのフラッシュモードでまたR2BA016に戻してからまたやればよくて、rootなんかやばそうで、うまくやってなくても修復できるなので、心配のなくていいですね。
ちなみに、R2BA024のrootったら、同じスレッドなかのレスにはR2BA026の更新もあったそうで、なかなかいろいろ忙しくてなりそうね。照
[GUIDE] Root your X10 R2BA024 ! { Update 26.07.2010 R2BA024 Root with 2/3-Steps }
Step 0
Extract the file to a desired folder!
Please extract it to a folder without spaces.
For example:
C:\Documents and Settings\USERNAME\Rooting is not good!
Better:
C:\Rooting\If you are running a 64-Bit System you should have downloaded the additional file!
Please extract it and copy the “DevID”-folder in “Step1”-Folder AND in “X10a”-Folder! Just overwrite the existing files!Step 1
Now you must run the first flash Process.
To do it just run the file: “1_downgrade_flash.cmd”.
It will give you a screen like this:
If you see that you have to connect your X10 in Flashmode now!
Connecting in flashmode is easy:
Shutdown your phone -> Connect USB Cable TO PHONE -> Push and HOLD the Back-Button -> CONNECT USB Cable to PC.
If you see the green LED in the upper right corner you are in Flashmode!
Now quick press ENTER (you have ~5sec until X10 boots up and leaves flashmode)If you done everything right you should see a lot of commands running in your Dosbox. It will look like this:
You have to wait a few minutes until you get this Message:
Congrats! Now you completed Step1! Please disconnect phone from PC an take your Battery out for ~5 sec.
Step 2
First startup the Phone and activate USB-Debugging:
Menu -> Settings -> Applications -> Development -> USB Debugging!
This looks like this:
Now execute the file named: “2_root_system.cmd” !
After you executed you should the this :
If you got a Error your USB-Debug mode doesnt work well. You have to reinstall new Pc-Companion! (Best is that you install thisone which your phone offers you)
If this step worked you should see this Screen at your phone after a few seconds:
run step 2 and select “update from sdcard” on phone. Be patient and don’t push the button again! It will take a few seconds!After it’s done you should see this screens at your phone:
All you have to do now is wait until this finishes. The phone seems to restart 4-5 times.
If everything is done your phone will bootup automatically!Now after your phone rebooted, please check again if USB-Debugging is still active!
If it’s active you have to switch back to the open Command Prompt windows and Push any key to finish the step! This will install the rest of the software including the su and superuser.apk!
It will look like this if the step runs well:
Congrats you have finished step2!
If you have a X10i you are done here!Step 3 – X10a Only!
Okay now you have to complete the conversion from X10i to X10a!
For this is step3!
To do it please run the file named: “3_patch_X10a_only.cmd”
After the copying is done you will see a similar window as in step1. It will tell you that you should connect your X10 in flashmode!
Please do it like in step 1. Connect the phone an press any button. The process will flash the baseband of X10a R2!Now you are done
Congrats!
こちらはR2BA024向けのMarket Fixアパッチなのです。
xda-developers – View Single Post – [GUIDE] Root your X10 R2BA024 ! { Update 26.07.2010 R2BA024 Root with 2-3-Steps }
Heres the Market Fix ive used on my Rooted x10i running R2BA024.
This is for an x10i with r2ba024 only.
Unzip and make sure you have debugging mode enabled and double click runme.cmd and let it run
係XDA的討論局,見X10i啲帖發現又有新的已root的build rom啦,所以下載後安了我部X10上試吓.
我之前順利地root咗R2BA023,今次同上次的工序係一樣的所以應該係冇問題,不過唔知點解搞錯咗,結果要重頭再做過.
問題點係有關Market Fix,我把R2BA023專用的patch放入了R2BA024之上.咁樣做唔單只有error,就連boot機都boot唔入,嚇死我了.多得要重新做過一次之後,令我更加明白root機當中的工序以及內容.
至今的root的工序的話,總言之,起初用flash mode轉回R2BA016,然係flash最新的firmware,最後就係放入root要用倒啲軟件啦.
正因為咁樣,所以,即使root機途中有咩差錯都好啦,總言之,由頭再從flash mode再返回R2BA016的話就可以架啦,root機呢類好似好危險的行為,就算唔得都可以修復,真係唔洗愁啊.
另外,當我root好咗R2BA024之後,發現同一帖內的繼續回覆流程內已有R2BA026的更新啦,真係好忙啊.^^;
[GUIDE] Root your X10 R2BA024 ! { Update 26.07.2010 R2BA024 Root with 2/3-Steps }
Step 0
Extract the file to a desired folder!
Please extract it to a folder without spaces.
For example:
C:\Documents and Settings\USERNAME\Rooting is not good!
Better:
C:\Rooting\If you are running a 64-Bit System you should have downloaded the additional file!
Please extract it and copy the “DevID”-folder in “Step1”-Folder AND in “X10a”-Folder! Just overwrite the existing files!Step 1
Now you must run the first flash Process.
To do it just run the file: “1_downgrade_flash.cmd”.
It will give you a screen like this:
If you see that you have to connect your X10 in Flashmode now!
Connecting in flashmode is easy:
Shutdown your phone -> Connect USB Cable TO PHONE -> Push and HOLD the Back-Button -> CONNECT USB Cable to PC.
If you see the green LED in the upper right corner you are in Flashmode!
Now quick press ENTER (you have ~5sec until X10 boots up and leaves flashmode)If you done everything right you should see a lot of commands running in your Dosbox. It will look like this:
You have to wait a few minutes until you get this Message:
Congrats! Now you completed Step1! Please disconnect phone from PC an take your Battery out for ~5 sec.
Step 2
First startup the Phone and activate USB-Debugging:
Menu -> Settings -> Applications -> Development -> USB Debugging!
This looks like this:
Now execute the file named: “2_root_system.cmd” !
After you executed you should the this :
If you got a Error your USB-Debug mode doesnt work well. You have to reinstall new Pc-Companion! (Best is that you install thisone which your phone offers you)
If this step worked you should see this Screen at your phone after a few seconds:
run step 2 and select “update from sdcard” on phone. Be patient and don’t push the button again! It will take a few seconds!After it’s done you should see this screens at your phone:
All you have to do now is wait until this finishes. The phone seems to restart 4-5 times.
If everything is done your phone will bootup automatically!Now after your phone rebooted, please check again if USB-Debugging is still active!
If it’s active you have to switch back to the open Command Prompt windows and Push any key to finish the step! This will install the rest of the software including the su and superuser.apk!
It will look like this if the step runs well:
Congrats you have finished step2!
If you have a X10i you are done here!Step 3 – X10a Only!
Okay now you have to complete the conversion from X10i to X10a!
For this is step3!
To do it please run the file named: “3_patch_X10a_only.cmd”
After the copying is done you will see a similar window as in step1. It will tell you that you should connect your X10 in flashmode!
Please do it like in step 1. Connect the phone an press any button. The process will flash the baseband of X10a R2!Now you are done
Congrats!
呢個係R2BA024專用的Market Fix檔.
xda-developers – View Single Post – [GUIDE] Root your X10 R2BA024 ! { Update 26.07.2010 R2BA024 Root with 2-3-Steps }
Heres the Market Fix ive used on my Rooted x10i running R2BA024.
This is for an x10i with r2ba024 only.
Unzip and make sure you have debugging mode enabled and double click runme.cmd and let it run
コメントはまだありません »
RSS feed for comments on this post. TrackBack URL